Lighting

A 10kg sand / shot bag for securing stands, tripods and other grip equipment.

A 5kg sand / shot bag for securing stands, tripods and other grip equipment.

This modern fresnel fixture is very versatile. Light output is equivalent to a 650W - 750W tungsten fresnel, without the heat. Adjustable between 2,800K - 10,000K, plus full +/- green adjustment and RGBW colours for total control over hue and saturation.

The ARRI / DoP Choice snapbag softbox for the SkyPanel S30-C is very portable and attaches quickly without requiring any tools or mounting hardware. The softbox further softens the output of the SkyPanel S30-C for flattering lighting of talent.

The ARRI / DoP Choice snapbag softbox for the SkyPanel S60-C is very portable and attaches quickly without requiring any tools or mounting hardware. The softbox further softens the output of the SkyPanel S60-C for flattering lighting of talent.

With light output greater than a 1kW tungsten soft light, variable colour temperature between 2,800K - 10,000K, plus/minus green adjustment, full hue and saturation control, DC input, and Rosco and Lee gel libraries, the ARRI Skypanel S30-C is hard to beat.

Brighter than a 2kW tungsten soft light and a 6kW tungsten space light, while being fully colour tuneable thanks to its RGB+W design. The S60-C also offers variable colour temperature between 2,800K - 10,000K, plus/minus green adjustment, DC input and Rosco and Lee gel emulation libraries.

The Aputure 90cm lantern is a large, soft light source, great for filling areas with soft and even light for natural overhead lighting.

Barndoors are all about light shaping. These ones from Aputure are designed specfically for the Aputure COB lights, such as the 300d II and 300x.

The Aputure F10 Fresnel is a Bowens mount Fresnal with an adjustable beam angle between 15-40° designed for use with the high output Aputure 600D. Fresnel lenses are used to focus the light and increase the illumination level.

The Aputure Fresnel 2X is a Bowens mount fresnel with an adjustable beam angle between 12 - 40°. Fresnel lenses focus and intensify a light source, increasing the illumination level.

The Light Dome 150 from Aputure is a 1.5m diamater modifier with both 1.5 stop and 2.5 stop diffusion fabrics for a softer light. It features a Bowens compatible speed ring for use with both Aputure Light Storm lights and other lights compatible with Bowens mount modifiers.

The Light Dome II from Aputure is an 890mm diamater modifier with both 1.5 stop and 2.5 stop diffusion fabrics for a softer light. It features a Bowens compatible speed ring for use with both Aputure Light Storm lights and other lights compatible with Bowens mount modifiers.

Inspired by beauty dish design, the Aputure Light Dome Mini II is a 550mm diameter modifier with 1/4 grid cloth diffusion and a Bowens compatible speed ring. It fits natively to the Aputure Light Storm family of light fixtures, and will work with many other Bowens mount lights too.

An LED light with an equivalent light output of a 1.2K HMI. Compatible with a large range of Bowens mount modifiers, this light packs a punch and is versatile.

The Light Storm 300d II from Aputure is a punchy LED hard light source with a luminance of up to 80,000 lux (spot at 1m with the 2X fresnel modifier). Use it as a hard light source or soften it up with frames or Bowens compatible modifiers.

The Light Storm 300x is a 2700K - 6500K LED fixture with a versatile Bowens mount. It's essentially the variable colour temperature version of the 300d II daylight fixture, but with lower maximum output due to the variable colour capability.

The Aputure 600c Pro offers you full colour tunability in a Bowens mount LightStorm fixture. Use the wide range of existing modifiers with the added versatility of RGBWW colour production - and with a light output greater than the daylight-only Aputure 300d II.

The Aputure 600D is a production powerhouse with a huge light output of up to 224,200 lux (spot at 1m with the F10 fresnel), which is 2.8x brighter than the Aputure LS 300D II. Output is comparable to a 1200W HMI or Joker 800. It has the same Bowens mount as the other LS fixtures in the family.

The Aputure LS 60d is the perfect solution when you need a versatile little light that has multiple power options and is small enough to hide away in all sorts of places. The kit includes an AC power adapter as well as accessories for battery options.

The Aputure space light is an omnidirectional are light designed to be used with the Aputure 120 and 300 series lights.

The Aputure Spotlight kit is designed to give super crisp shadows with minimal colour fringing around the edges.

The Avenger 2030D is a workhorse C-stand. It's a three section, 2 riser stand with a baby (5/8") attachment that holds up to 10kg, with a height range of 134cm to 300cm and a detachable turtle base for easier transportation.

The Avenger H2006 is a 6x6 frame that folds down into a single component (plus the two ears for stand attachment), making it easier to fit in vehicles for transportation. This is the frame and ears only - no stands.

The Avenger H2006 is a 6x6 frame that folds down into a single component (plus the two ears for stand attachment), making it easier to fit in vehicles for transportation. This kit includes two Matthews 40" c-stands.

The H2508 foldable 8x8 frame from Avenger has a footprint about the same size as a c-stand when collapsed, and weighs a friendly 13kg - so it is easier to transport than many other 8x8 frames.

Use light modifiers with a Bowens mount on Elinchrom flash heads with this adapter.

Use light modifiers that have a Bowens mount on a Profoto OCF head with this adapter. The adapter has a locking screw to secure the modifier in place.

The ST-E3-RT is Canon's radio trigger offering and is designed to complement speedlites with integrated radio receivers, such as the 600EX and 600EX II. Automatic exposure via E-TTL II and high speed sync are two compelling features made possible by this transmitter.

The Elinchrom 100cm Rotalux Deep Octa Softbox creates a more focused soft light or more crisp, direct light than standard octagonal softboxes. Ideal for location beauty shoots.

The Elinchrom 100cm Rotalux Mini Octa Softbox offers a superior quality, even light combined with great portability and easy set-up.

The Elinchrom 135cm Rotalux Midi Octa Softbox is a medium size softbox and offers a superior quality, even light combined with great portability and easy setup.

Renowned Elinchrom light in an easy to use, dependable mono head is what the Style RX 600 is all about. Power output ranges from 18 Ws to 600 Ws and flash duration is as short as 1/2050s.

Allows the use of Elinchrom modifiers on Profoto OCF heads.

A punchy, versatile 800W HMI fixture with a great light quality that is also domestic circuit friendly. Use it either as a traditional HMI or as a bug light inside a range of light modifiers (lanterns, softboxes, etc).

The Kino Flo Celeb 200 LED is a high quality soft light fixture. Easily dial in your desired colour temperature between 2700K and 5500K. There's no colour shift or flickering when dimmed. Equivalent output to a 750W tungsten soft lamp.

The floppy is a versatile production tool. Use it for negative fill, to shade a monitor, as a flag to cut light etc. This is a 4' x 4' solid black, top hinged floppy that opens to 4' x 8'.

MSE Grip 20-inch (baby) c-stand with removable spring loaded turtle base, grip head and extension arm. Chrome colour. Load capacity of 10kg. Height range 0.76m to 1.61m.

MSE Grip 40-inch c-stand with removable spring loaded turtle base, grip head and extension arm. Chrome colour. Load capacity of 10kg. Height range 1.34m to 3.21m.

MSE Grip 40-inch c-stand with removable spring loaded turtle base, grip head and extension arm. Black colour. Load capacity of 10kg. Height range 1.34m to 3.21m.

Designed specifically for the Matthews brand combo stands, these wheels provide the convenience of a roller stand without the larger footprint of those stands. Set of three wheels.

A sturdy, steel double riser combo stand from MSE. This stand has a wide footprint and rocky mountain leg for better stability on both even and uneven ground. Max payload of 40kg and a height range of 1.2 - 3.4m.

Steel double riser combo stand with a junior (1 1/8") receiver and baby (5/8") stud. One leg is adjustable for levelling on uneven terrain. Load capacity is 33kg. Height range is 0.85 - 1.9m.

Hoist light fixture payloads of up to 40kg to a height up to 3.61m with the Matthews Studio Equipment Mini Vator II wind up stand. Includes studio castor wheels for easier relocation of fixtures.

The Manfrotto 1004BAC Master is a stackable, air-cushioned aluminium light stand that supports loads up to 9kg and has a maximum height of 3.6m.

With two collapsible 4' x 4' (48x48") frames, the Matthews Road Flags II kit is a portable light modifier kit. The fabrics included are two silks, a single scrim, a silver lame and a flag. The mark II version of this kit packs down to about half the size of the original Road Flags kit.

With two collapsible 4' x 4' (48x48") frames, the Matthews Road Flags kit is a portable light modifier kit. The fabrics included are two silks, a single scrim, a silver lame and a flag.

The PavoSlim 120C is a thin, lightweight 2x1 RGBWW panel / mat light that is fast to set up thanks to its integrated soft box, multiple rear mounting points and integrated CRMX functionality. Being so light, the PavoSlim is ideal for use on long boom arms where weight quickly becomes a problem.

The Pavotube II 15X from Nanlite is a high CRI & TLCI 0.6m long tube light with an internal battery and a variety of operating modes - CCT, HSI, Effects and Pixel Effects (pixel mapping). This kit of four includes floor stands and baby pin mounts for use with grip heads etc.

The Pavotube II 15X from Nanlite is a high CRI & TLCI 0.6m long tube light with an internal battery and a variety of operating modes - CCT, HSI, Effects and Pixel Effects (pixel mapping). This kit of eight includes floor stands and baby pin mounts for use with grip heads etc.

The Pavotube II 30X from Nanlite is a high CRI & TLCI 1.2m long tube light with an internal battery and a variety of operating modes - CCT, HSI, Effects and Pixel Effects (pixel mapping). This kit of four includes floor stands and baby pin mounts for use with grip heads etc.

The Pavotube II 30X from Nanlite is a high CRI & TLCI 1.2m long tube light with an internal battery and various operating modes - CCT, HSI, Effects and Pixel Effects (pixel mapping). This kit of eight includes floor stands and baby pin mounts for use with grip heads etc, all in a wheeled hard case.

This kit combines the punchy Nanlux Evoke 1200B with the FL-35YK fresnel attachment for a focusable beam between 11° and 45°. With a maximum output at 3m of 47,800 lux, this is a very versatile lighting fixture. Its built-in LumenRadio CRMX feature makes it a workhorse on professional sets.

The Nanlux Evoke 1200B is a powerful and versatile LED light fixture designed for professional film and video production with a colour temperature range of 2700K to 6500K.

The Evoke 900C is a powerful 940W, full colour LED light fixture that can produce particular colours more saturated than RGBW/RGBWW fixtures thanks to its RGBLAC (red/green/blue/lime/amber/cyan) chip array. It also has advanced features like built-in LumenRadio CRMX support for wireless DMX.

The Evoke 900C with FL-35YK fresnel is a potent 940W, full colour fixture kit that can be focused from 11° - 45° via the fresnel attachment. Included barn doors provide greater control over light spill.

The Profoto B1X is one of the best battery powered monolights available. The B1X offers 500Ws of power over a range of 9 stops in a robust and lightweight formfactor. The location kit features two B1X monolights packed in a travel backpack and is a powerful kit that you can take almost anywhere.

The OCF Beauty Dish is very portable thanks to its collapsible design - simply loosen the internal rods to fold the entire unit down. This makes it a flexible option for both studio and location use. Includes an OCF speed ring for Profoto lights, deflector plate and external diffusion.

A collapsible 600mm / 24" softbox with Profoto speed ring. The octa shape produces a nice looking catch-light in the eyes.

The OCF Zoom Reflector helps shape the light emitted from OCF heads and adds up to 1.2 f-stops of output. Light spread is adjustable from 55° to 85° by moving the reflector back and forth on the head.

Hazers are typically used to gently diffuse a room or enhance lighting effects, and produce a more subtle effect than fog or smoke machines. The Rosco V-Hazer uses a specially developed fluid that complies with industry safety guidelines.

The Sekonic C800 is a full spectrum colour and illuminance meter. Its purpose is to help you better understand the spectral characteristics of different light sources. You can use this information to avoid unwanted colour casts and improve the overall colour rendering of a scene.

China silk (also known as half silk) has a slightly warmer colouration than poly silk and reduces light intensity by 1 2/3 stops.

LA Rag House 8x8 digital green fabric for chroma key compositing.

Silent white full grid cloth (12x12) gives a directional softness with a reduction of 2+2/3 stops of light.

Silent white half grid cloth gives a directional softness with a reduction of 2+1/3 stops of light.

Half grid gives a directional softness with a silky feel. The grid pattern in the cloth helps direct the light (similar to how an egg crate works), while the diffusion softens the light. The result is soft, directional shadows.

Silent white quarter grid cloth (12x12) gives a directional softness with a reduction of 1+2/3 stops of light.

Silent white quarter grid cloth gives a directional softness with a reduction of 1+2/3 stops of light.

Silent white quarter grid cloth gives a directional softness with a reduction of 1+2/3 stops of light.

LA Rag House 12x12 solid black for negative fill, cutting, etc.

LA Rag House 8x8 white bounce is a dual purpose fabric with a reflective side for bouncing light sources, and a black side that can be used for negative fill or cutting.

LA Rag House 6x6 unbleached muslin. Bounce sources off or shoot through this fabric depending on the look you want to achieve.

Artificial/full silk is a heavy diffusion for a soft and even light spread. It has a significant amount of ambient bounce and is one of the most common forms of diffusion used. Reduction is 2 stops.

Half grid gives a directional softness with a silky feel. The grid pattern in the cloth helps direct the light (similar to how an egg crate works), while the diffusion softens the light. The result is soft, directional shadows. This 8x8 textile is designed to be used with an 8x8’ frame.

Quarter silk is a light diffusion rag that is great for taking the hard edge off a source without a substantial loss of light. It has an even spread of light with a significant amount of ambient bounce.