Monitor Hood

NP-F Battery Adapter (RX)

NP-F Battery Adapter (TX)

RS Gimbal Mounting Plate

M4x12 SHCS

M3 Allen Key

USB-C Power Cable

D-Tap Power Cable

Transport Case

The DJI Transmission is a wireless transmission system designed specifically for filmmakers. This system allows you to transmit video footage directly from your camera to the wireless montitor, with virtually no latency.

With a range of up to 6 km (line of sight) and a maximum bitrate of 40 Mbps, the DJI Transmission is capable of transmitting high-quality video footage, even in challenging environments. Its compact and lightweight design makes it easy to carry and install, and it's compatible with a wide range of cameras.

Thanks to the DJI Transmission's powerful encryption and data transfer capabilities, you can be sure that your video footage is always secure and protected. And with a user-friendly interface that's easy to navigate, you can quickly adjust settings and make changes on the fly.

Whether you're a professional filmmaker or an aspiring videographer, the DJI Transmission is an useful tool that will help take your video production to the next level. With its advanced features and reliable performance, it's a great solution for capturing stunning footage from any location.

DJI Transmission Kit

DJI Video Transmitter

DJI High-Bright Remote Monitor

IDX SL-F50 7.2V 6600 mAh Battery

IDX LC-2A Battery Charger

Belden SDI Cable - 0.7m

Belden SDI Cable - Short

HyperThin HDMI 2.0 Type-A to Type-A Cable - 80cm

The transmitter from the DJI Transmission system mounted on a DJI Ronin RS 3 Pro gimbal.

The DJI Transmission is a wireless transmission system designed specifically for filmmakers. This system allows you to transmit video footage directly from your camera to the wireless montitor, with virtually no latency.

3/16" Hex Key

2.5mm Hex Key

Pelican 1200 Case

The Teradek ACE 800 has the same solid video performance that modern generation Teradek units are known for, with a maximum optimal transmission distance of up to 240m in ideal conditions.

The transmitter has an SDI input as well as an SDI loop output for easily looping out to an on board monitor. The receiver has an SDI output as well as a full size HDMI output for added versatility.

The transmitter and receiver both have a large 6-36VDC input range via the 2pin LEMO connector. Our kit is supplied with 2x D-Tap cables and an AC cable but other power options are available - please get in touch if you have a specific requirement.

**Wireless performance is very dependent on environmental conditions at your shooting location. Spectrum congestion can severely reduce range or even cause the units to not work at all. Testing and/or a backup plan is strongly recommended**.

Teradek ACE 800 1:1 Kit

Teradek ACE 800 Transmitter

Teradek ACE 800 Receiver

Belden SDI Cable - 1m

D-Tap To 2-Pin Lemo Cable - 30cm

D-Tap To 2-Pin Lemo Cable - 45cm

D-Tap To 2-Pin Lemo Cable - 60cm

2-Pin Lemo AC Adapter

The Teradek ACE 800 has the same solid video performance that modern generation Teradek units are known for, with a maximum optimal transmission distance of up to 240m in ideal conditions.

1/4" Mounting Bolt

Teradek Transport Case

**SDI input/output only. Also available as a dual HDMI/SDI model.**

Solid wireless video performance over a range of up to 90m line of sight (for greater range, see the Teradek Bolt Pro 600).

These second generation Bolt models are a significant step up in reliability over earlier models from both Teradek and other manufacturers.

The Bolt Pro 300 has features often required on professional sets - such as timecode and SDI record flag pass-through (useful for recording the split for easier playback), and the ability to multicast to up to four receivers from one transmitter.

### Powering The Units
Two d-tap to 2-pin Lemo cables are provided as standard to power the transmitter and receiver. We stock various cables to power the transmitter using more robust connectors where available (e.g. Hirose to 2-pin Lemo and 2-pin Lemo to 2-pin Lemo). Talk to us about your specific requirements if you need something that isn't in the standard kit.

Teradek Bolt Pro 300 SDI 1:1 Kit

Teradek Bolt Pro 300 SDI Transmitter

Teradek Bolt Pro 300 SDI Receiver

Solid wireless video performance over a range of up to 90m line of sight. SDI only model.Timecode and SDI record flag pass-through support.

1/4" Mounting  Bolt

Pelican 1010 Case

**SDI input/output only.**

Solid wireless video performance over a range of up to 180m. The Bolt Pro 600 is a major step up in reliability over earlier models from both Teradek and other manufacturers.

Even when the increased range of the Bolt Pro 600 model isn't needed, the external antennas offer improved resilience over shorter ranges where conditions for wireless transmission are not ideal (inside, through some walls, locations with congested spectrum, etc).

Aside from the reliability, the Bolt 600 has additional features required on professional sets - such as timecode and SDI record flag pass-through (useful for recording the split for easier playback), and the ability to multicast to up to four receivers from one transmitter.

## Powering The Units
Two d-tap to 2-pin Lemo cables are provided as standard to power the transmitter and receiver. We stock various cables to power the transmitter using more robust connectors where available (e.g. Hirose to 2-pin Lemo and 2-pin Lemo to 2-pin Lemo). Talk to us about your specific requirements if you need something that isn't standard.

**Wireless performance is very dependent on environmental conditions at your shooting location. Spectrum congestion can severely reduce range or even cause the units to not work at all. Testing and/or a backup plan is strongly recommended**.

Teradek Bolt Pro 600 SDI 1:1 Kit

Teradek Bolt Pro 600 Transmitter

Teradek Bolt Pro 600 Receiver

Solid wireless video performance over a range of up to 180m. The Bolt Pro 600 is a major step up in reliability over earlier models from both Teradek and other manufacturers.

SDI input/output only.

Solid wireless video performance over a range of up to 180m. The Bolt Pro 600 is a major step up in reliability over earlier models from both Teradek and other manufacturers. This is a 1:2 kit with one transmitter and two receivers.

Even when the increased range of the Bolt Pro 600 model isn't needed, the external antennas offer improved resilience over shorter ranges where conditions for wireless transmission are not ideal (inside, through some walls, locations with congested spectrum, etc).

Aside from the reliability, the Bolt 600 has additional features required on professional sets - such as timecode and SDI record flag pass-through (useful for recording the split for easier playback), and the ability to multicast to up to four receivers from one transmitter.

## Powering The Units
Three d-tap to 2-pin Lemo cables are provided as standard to power the transmitter and receivers. We stock various cables to power the transmitter using more robust connectors where available (e.g. Hirose to 2-pin Lemo and 2-pin Lemo to 2-pin Lemo). Talk to us about your specific requirements if you need something that isn't in the standard kit.

**Wireless performance is very dependent on environmental conditions at your shooting location. Spectrum congestion can severely reduce range or even cause the units to not work at all. Testing and/or a backup plan is strongly recommended**.

Teradek Bolt Pro 600 SDI 1:2 Kit

Belden SDI Cable - 2m

Solid wireless video performance over a range of up to 180m. The Bolt Pro 600 is a major step up in reliability over earlier models from both Teradek and other manufacturers. This is a 1:2 kit with one transmitter and two receivers.

Wireless Monitoring