This kit includes two Track E recorders.
The Track E is a small 32-bit float audio recorder with a 3.5mm input jack and internal 16GB micro-SD card. An omni-directional microphone, mic clip and wind jammer are also included in the kit.
You can simply turn the Track E on and start recording without worrying about setting audio gain. The 32-bit float files allow you to adjust the audio levels as required in post without worrying about any clipping or raising the noise floor (using a compatible editor, such as Adobe Audition).
When recording audio for video, you can easily sync with one or more cameras on a Tentacle network using the Tentacle apps.
The Track E has an internal battery that is good for around 10 hours of recording. To transfer audio files, you can either remove the micro-SD card or connect the entire unit to a computer via the integrated USB-C port.
Also available as single units.
Gerald Undone runs you through what the Track E is and how to get up and running with one.
Curtis covers the Tentacle Sync Track E in his usual balanced and informative way.
32-bit Float or 24-bit
With 16GB card: 32-bit Float - 23 hours. 24-bit - 30 hours.
mircoSDHC Card up to 32GB (Recommended Class 10)
Low Cut Filter, Limiter (24-bit only)
Locking 3.5mm jack
Mic Plug In Power
3.5mm Jack (dual mono)
USB-C (USB 2.0)
Charging, Card Reader, Firmware Update
20Hz - 20kH
+6 to +46 dB
110 dB (typical)
≤ -85 dB (0.05%)
Control & Sync
5.0 (Low Energy)
Tentacle Setup App (iOS/Android)
Via Bluetooth or Jam-Sync via cable
LTC via microphone input
SMPTE 12M / 23.98, 24, 25, 29.97, 29.97DF and 30fps
Built-in rechargeable lithium polymer battery
Battery Operating Time
Up to 10 hours
2 hours max
47mm x 68mm x 19mm / 1.85 x 2.67 x 0.74 inches
58g / 2.0 oz
No articles yet.
Quickly find similar products by selecting one or more attributes of this product below.