100mm High Hat

75mm Bowl Adapter

100mm Tripod Ball Mount

Outrigger Feet

Battery Charger

5/32 Allen Key

M5 Allen Key

Ethernet Cable

Coiled DC Power Cable

Countersunk 1/4-20" Screw

Cup Washer

3/6-16" Fluid Head Tie Down

M10 Fluid Head Tie Down

Friction Brake

Giottos Quick Release Plate

1/4-20" High Hat Fastening Screw

Motor Mounting Plate

Pelican 1010 Case

Plastic Washer

Rubber Washer

Pulley

Speed Doubler Pulley

RJ45 Splitter

USA to AU Plug Adapter

Transport Case

Drag Control Spring

The Kessler CineSlider is a portable linear slider for adding camera movement without a great deal of setup. This is the one metre length version.

For heavier camera setups, see the <ProductLink id="5fb72af735394a12a3e59954">Ronford Baker slider</ProductLink> instead.

Our Kessler package includes a motor and Oracle controller, for precise recording and playback of moves, and motion time lapses. The motor also helps you get the smoothest tracking shots through applying a constant torque that can be harder to achieve by manually pushing the camera or using the crank handle.

## Suitable For A Wide Range Of Cameras
The Kessler CineSlider is best suited to lighter weight cameras - DSLRs, mirrorless, Canon C100, C300 etc. The heavier the camera setup and the longer the focal length, the more difficult it is to get smooth results (especially if the centre of gravity is raised above the slider carriage).

**Note that with heavier cameras, it is more difficult to achieve smooth tracking shots and the slider needs to be supported at both ends - centre mounting is only suitable for light camera packages. We strongly recommend the <ProductLink id="5fb72af735394a12a3e59954">Ronford Baker slider</ProductLink>  when using heavier cameras (Arri Alexa/Amira, Red Epic/Weapon etc) or when using longer focal lengths.**

The slider kit includes a 75mm/100mm bowl mount suitable for centre mounting, or you can support it at either end with 1/4" and 3/8" compatible supports (stills tripods, light stands, etc).

Kessler CineSlider Kit

Kessler CineSlider

Kessler Oracle Controller

500 Series elektraDRIVE Motor

12V Battery Pack

The Kessler CineSlider is a portable linear slider for adding camera movement without a great deal of setup. This is the one metre length version.

Standard Length Tube

900mm Expansion Tube

3 Leg Spider Dolly

150mm Fitting

100mm Fitting

75mm Adapter

Mitchell/Moy Fitting

Jib Tripod

10kg Weight

5kg Weight

2.5kg Weight

1.5kg Weight

Weight Shaft Coupler

Weight Shaft

Vector Weight Shaft

Tube Pins

7/32" Allen key

Boom Lock Assembly

Extension Levelling Rod

Fine Tuning Weight with Screw

Front Assembly

Jib Transport Cases

Levelling Rod

Losmandy Tripod

Main Centre Assembly

Screw Ties

Studio Wheels

Threaded Weight Lock

Three Way Leveller

Weights Transport Crate

Tripod Feet

Steel Weight Bar

Tube Clamps

Tube Joiner

Weight Bar Safety Screw

See [this guide](/articles/losmandy-porta-jib-setup) for detailed setup instructions.

Add production value to any shoot with dynamic camera shots using the Losmandy Porta-Jib. Suitable for a wide range of camera setups (up to 45kg in standard configuration).

**Fittings are included for 150mm, 100mm, 75mm and Mitchell / Moy heads. A fluid head is not included but is available as an additional item**.

The vertical height of the jib in the standard configuration is 2.3m, or 3.1m with the extension kit (measured from the ground to the front insert).

The Porta-Jib can be set up in 5- 10 minutes (once you know how it's done!) and is suitable many different camera setups - from DSLRs to camcorders to high end digital cinema cameras. 150mm, 100mm and Mitchell front inserts are included for compatibility with a range of fluid heads and other camera support accessories. The included spider dolly with studio wheels allows for easy re-positioning of the jib when required, and the three way leveller makes it far more practical to level the jib when it is fully loaded.

Also included is a 90cm extension kit, for further reach. This transforms the jib into a small crane. The maximum payload is reduced in this configuration, however, to 20kg.

Weights are provided with the jib, sufficient to provide counterweight for the maximum payload supported by the jib (max 45kg in standard configuration and max 20kg with the 90cm extension).

Losmandy Porta-Jib

Suitable for a wide range of camera setups (up to 45kg in standard configuration). Includes fittings for 150mm, 100mm, 75mm and Mitchell / Moy heads. Vertical height is 2.3m in standard configuration, or 3.1m with the extension kit. Includes a studio dolly.

Ronford Baker slider and adjustable support kit, combining the <ProductLink id="5fb72af735394a12a3e59954">1.2m heavy duty slider</ProductLink> with our <ProductLink id="5fb72aa335394a6233e5993c">Ronford Baker Billet Bazooka package</ProductLink>.

The Bazooka offers a stable platform for the slider and using the adjustable riser section gives you 600mm of height adjustment without needing to change any of the fixed riser sections. The crank handle on the adjustable riser means one person can adjust the height of the slider even when it's fully loaded with a camera package.

Ronford Baker Bazooka + Slider Kit

Ronford Baker Slider (1.2m)

Ronford Baker Billet Bazooka

Ronford Baker slider and adjustable support kit, combining the 1.2m heavy duty slider with our Ronford Baker Billet Bazooka package.

Short Scaffold Leg With Suction Cup

Cross Bar Support

Slider Carriage

Locking Nut

Magnetic End Stops

Ronford Baker Slider Custom Case

Pelican 1520 Case

The Ronford Baker slider is built tough so that it remains smooth with whatever camera package you put on it. Suitable for any fluid head and camera setup that can attach via Mitchell/Moy, 150mm or 100mm bowl fitting (your choice is provided).

The overall length of the slider is 1.22m (48") with 0.99m (39") of camera travel. When mounted using the Mitchell centre mount, the slider can rotate 360 degrees via a lockable swivel mechanism. Adjustable magnetic end-stops allow you to reach the end of the travel range without a sudden stop.

We can provide a Mitchell, 150mm or 100mm fitting for camera attachment but the slider centre mounts to its support via Mitchell mount only. You can use support crossbars (supplied) in combination with standard scaffold tubing to build support rigging for the slider.

For a solid, adjustable support platform for the slider, take a look at our Ronford Baker Billet Bazooka.

Ronford Slider

Fluid Head Mounting Kit

The Ronford Baker slider is built tough so that it remains smooth with whatever camera package you put on it. Suitable for any fluid head and camera setup that can attach via Mitchell/Moy, 150mm or 100mm bowl fitting (your choice is provided).

Dollies, Jibs & Sliders

Dollies, jibs and sliders from Ronford Baker, Kessler and Losmandy for hire.

Kessler CineSlider Kit

Losmandy Porta-Jib

Ronford Baker Bazooka + Slider Kit

Ronford Baker Slider (1.2m)