We might have it, or can get it for you. Let us know in the box below. Include contact details if you want us to contact you.
SDI and HDMI input/output. Also available as an SDI only model.
Solid wireless video performance over a range of up to 90m line of sight (for greater range, see the Teradek Bolt Pro 600).
These second generation Bolt models are a significant step up in reliability over earlier models from both Teradek and other manufacturers.
The Bolt Pro 300 has features often required on professional sets - such as timecode and SDI record flag pass-through (useful for recording the split for easier playback), and the ability to multicast to up to four receivers from one transmitter.
Two d-tap to 2-pin Lemo cables are provided as standard to power the transmitter and receiver. We stock various cables to power the transmitter using more robust connectors where available (e.g. Hirose to 2-pin Lemo and 2-pin Lemo to 2-pin Lemo). Talk to us about your specific requirements if you need something that isn't in the standard kit.
|Delay||Less than 0.001s (1ms) with no format conversion enabled.|
|Range||Up to 90m line of sight. The operating environment will impact the range.|
|Supported Video Formats||
SDI: 10-bit YCbCr 4:2:2 with no format conversion.
HDMI: 8-bit RGB 4:4:4.
Transmitter: 1x 75 Ohm BNC and 1x type A receptacle HDM.
Receiver: 1x USB 3.0 micro B.
Transmitter: 1x 75 Ohm BNC (loop-out).
Receiver: 1x 75 Ohm BNC and 1x type A receptacle HDMI.
|Audio Support||48kHz 24 bit PCM.|
|Operating Frequencies||5.19 - 5.23 GHz and 5.27 - 5.67 GHz.|
Transmitter: 17dbm EIRP.
Receiver: 15dbm EIRP.
|Power Input||7 - 28VDC via 2-pin Lemo.|
Transmitter: 112 x 66 x 27mm.
Receiver: 147 x 89 x 25mm.
The following items are included when you hire the Teradek Bolt Pro 300 SDI/HDMI 1:1 Kit:
Learn more about the Teradek Bolt Pro 300 SDI/HDMI 1:1 Kit on the official product page.