The Sound Devices 664 is a professional 12 input, 16 track mixer and recorder with some of the best preamps in the industry. It has an integrated high quality Ambient timecode generator and can record 24-bit mono and poly BWAV files to CF and SD media simultaneously.
Our 664 kit is supplied as a production ready field kit, with a K-Tek Stingray audio bag, battery distribution system and battery meter from Remote Audio, two NP-style batteries from IDX to power the mixer and compatible audio receivers, and a variety of interconnecting cables (see included list below).
The 664 has six mic/line level, full size XLR3F inputs. An additional six line level inputs (7 - 12) can be enabled by switching the direct outputs (TA3) to inputs. Inputs 1 and 6 can accept digital AES42 or AES3 signals.
The 664 has four pairs of balanced analog output connections for the Master Bus (XLR-3M, TA3, and 2 Hirose 10-pin), and one pair of balanced analog outputs for the Aux Bus (TA3). There are also two stereo unbalanced outputs for the Master Bus (TA3 and 3.5mm Tape Outputs).
|Recording Tracks||16 tracks (12 inputs, 4 output buses), monophonic or polyphonic Broadcast WAV or timecode-stamped MP3.|
|A/D||24-bit, 114 dB, A-weighted dynamic range typical.|
44.1 kHz, 47.952 kHz, 48 kHz, 48.048 kHz SR.
|Frequency Response||20Hz - 50kHz.|
|THD & Noise||0.09% max (50 kHz, +18 dBu at line out, fade fully up).|
|Equivalent Input Noise||-126 dBu (-128 dBV) maximum (22 Hz - 22 kHz bandwidth, flat filter, trim control fully up).|
|High Pass Filters||Sweepable 80 Hz to 240 Hz, 12 dB/oct at 80 Hz, 6 dB/octave at 240 Hz.|
|Input Limiters||Individual limiters on both trim and fader stages, +16 dBu threshold, 20:1 limiting ratio, 1ms attack time, 500ms release time.|
|Maximum Gain||Mic-In-to-Line-Out: 93 dB. |
Mic-In-to-Aux-Out, -10 Out: 79 dB.
Line-In-to-Line-Out: 39 dB
|Timecode & Sync||Modes Supported: off, rec run, free run, 24h run, external. |
Frame Rates: 23.976, 24, 25, 29.97DF, 29.97ND, 30DF, 30ND.
Accuracy: Ambient generator, 0.5 frame in 24 hr.
Timecode Input: 20k ohm impedance, 0.3 V - 3.0 V p-p (-17 dBu - +3 dBu).
Timecode Output: 1k ohm impedance, 3.0V p-p (+12 dBu).
Word In/Out: square wave; 10k/75 ohm, 1-5V p-p input; 75 ohm, 3.3V p-p output, at SR.
|Environmental||-20°C to 60°C, 0 to 90% relative humidity; (non-condensing).|
The following items are included when you hire the Sound Devices 664 Mixer / Recorder:
Learn more about the Sound Devices 664 Mixer / Recorder on the official product page.