Up to 95MB/s read and 90MB/s write speed. 64GB C10, U3 SDXC card.
With two collapsible 4x4 (48x48") frames, the Matthews Road Flags kit is a portable light modifier kit. The fabrics included are two silks, a single scrim, a silver lame and a flag.
High quality, flexible 5m Belden 1694F RG6/U coax cable with Neutrik rear-twist BNC connectors. Rated to 4.5GHz.
High quality, flexible 10m Belden 1694F RG6/U coax cable with Neutrik rear-twist BNC connectors. Rated to 4.5GHz.
High quality, flexible 15m Belden 1694F RG6/U coax cable with Neutrik rear-twist BNC connectors. Rated to 4.5GHz.
High quality, flexible 20m Belden 1694F RG6/U coax cable with Neutrik rear-twist BNC connectors. Rated to 4.5GHz.
3 metre DC power cable with quality Neutrik 3-pin male XLR and 3-pin female XLR connectors. Rated to 13A. Typically used with block batteries or other 3-pin XLR DC power sources.
5 metre DC power cable with quality Neutrik 3-pin male XLR and 3-pin female XLR connectors. Rated to 13A. Typically used with block batteries or other 3-pin XLR DC power sources.
10 metre DC power cable with quality Neutrik 3-pin male XLR and 3-pin female XLR connectors. Rated to 13A. Typically used with block batteries or other 3-pin XLR DC power sources.
3 metre DC power cable with quality Neutrik 4-pin male XLR and 4-pin female XLR connectors. Rated to 13A. Typically used with block batteries or other 4-pin XLR DC power sources.
5 metre DC power cable with quality Neutrik 4-pin male XLR and 4-pin female XLR connectors. Rated to 13A. Typically used with block batteries or other 4-pin XLR DC power sources.
10 metre DC power cable with quality Neutrik 4-pin male XLR and 4-pin female XLR connectors. Rated to 13A. Typically used with block batteries or other 4-pin XLR DC power sources.
Use the CUB-1 with an Alexa Mini to feed distance information from a CineTape or Arri UDM-1 to a WCU-4 hand unit. The CUB-1 converts the serial protocols of the distance sensors to the LBUS protocol.
The cmotion pan-bar zoom is a convenient zoom control for use with Arri / cmotion cforce based lens control systems. The control unit has a single LBUS connector for both power and communication. The rod clamp fits rods that are 15mm - 32mm in diameter.
Use PL lenses with Sony E mount cameras with this Metabones PL to E mount adapter. Includes a lens support foot with a 1/4" hole for use with lens supports.
Steel double riser combo stand with a junior (1 1/8") receiver and baby (5/8") stud. One leg is adjustable for levelling on uneven terrain. Load capacity is 33kg. Height range is 0.85 - 1.9m.
MSE Grip 40-inch c-stand with removable spring loaded turtle base, grip head and extension arm. Chrome colour. Load capacity of 10kg. Height range 1.34m to 3.21m.
MSE Grip 20-inch (baby) c-stand with removable spring loaded turtle base, grip head and extension arm. Chrome colour. Load capacity of 10kg. Height range 0.76m to 1.61m.
A compact EVF with a vivid 1280x720 pixel, 24-bit RGB colour depth OLED display. SDI signal input and 2-pin Lemo power connector.
Suitable for use in cameras like the Arri Alexa SXT (with adapter), Arri Alexa Mini, Arri Amira, Canon C300 MKII, Blackmagic Ursa Mini and others that use CFast 2.0 media. Supports high frame rate acquisition and fast data transfers with a read speed of up to 540MB/s.
Designed specifically for the Arri Alexa Mini, this Nauticam underwater housing fits a huge range of lenses via its expandable port design. Media and battery changes are quick and easy, and it features direct diver control as well as surface control options.
A 35mm full frame mirrorless camera offering internal 4K UHD and full HD recording, and 100fps and 120fps high frame rate options when shooting full HD.
Ronford Baker slider and adjustable support kit, combining the 1.2m heavy duty slider with our Ronford Baker Billet Bazooka package.
A rock solid, modular support platform for great flexibility on shoot locations. Adjustable legs for levelling, 5 fixed riser sections plus a 60-100cm adjustable riser for a total of 2.7m of height adjustment.
The Ronford Baker slider is built tough so that it remains smooth with whatever camera package you put on it. Suitable for any fluid head and camera setup that can attach via Mitchell/Moy, 150mm or 100mm bowl fitting. Overall length is 1.22m (4') with 0.99m of camera travel.
7-inch, full HD resolution monitor that is viewable in direct sunlight without a sun hood. This SmallHD 702 kit comes complete with a handheld cage and v-mount battery plate (v-mount batteries not included by default). SDI and HDMI input / loop-through.
18mm T2.2, 25mm T2.2, 32mm T2.3, 40mm T2.3, 50mm T2.3 and 75mm T2.3. The TLS rehousing of the vintage Cooke Speed Panchro lenses is widely considered the best available. The mechanics of this set look and feel very much like the modern Cooke S4 lenses.
The Flowcine Serene reduces vibrations in the vertical axis as well as the side to side motion introduced by moving when wearing the Easyrig, resulting in a smoother handheld look. The Easyrig is fitted with a 600N shock for an operating range of about 11-15kg.
The latest generation of what has been pretty much the standard ENG style tripod system for decades. The Video 18 S2 has a payload range of 2-20kg but weighs only 8.6kg. It's ideal when you need stable support but don't have many hands to lug gear between locations.
Solid wireless video performance over a range of up to 90m line of sight. SDI and HDMI model.Timecode and SDI record flag pass-through support.
Solid wireless video performance over a range of up to 90m line of sight. SDI only model.Timecode and SDI record flag pass-through support.
With light output greater than a 1kW tungsten soft light, variable colour temperature between 2,800K - 10,000K, plus/minus green adjustment, full hue and saturation control, DC input, and Rosco and Lee gel libraries, the Skypanel S30-C is hard to beat.
800Wh NiMH block battery with two 14V (4 pin XLR) and two 24V (3 pin XLR) regulated outputs. All outputs can be used simultaneously up to a 20A maximum load.
150mm or Mitchell/Moy base. The OConnor 2560 is a lighter, smaller version of the 2575 head. It has the same continuous counterbalance and drag adjustments that make OConnor heads so popular.
The acclaimed Angenieux look in a versatile 10x zoom. The new 25-250mm has a larger image circle to cover new S35+ formats, and doesn't suffer from the breathing and distortion often found in more compact zooms.
A classic Leica M lens. The Summicron-M 35mm f/2 ASPH creates gorgeous images and is very compact and lightweight. It's a pleasure to shoot with.
A tried and true performer, the Leica Summicron-M 50mm F2 is a lens often found almost permanently attached to Leica M cameras.
One of the most coveted lenses in the world, the Leica Summilux-M 35mm f/1.4 ASPH offers superior optics in a compact lens.
Typ 246. The pinnacle of digital black and white photography. The Leica M Monochrom has no colour filter array, so it produces images you can't get simply by desaturating a colour image.
Typ 240. The top of the range of the colour Leica M rangefinder cameras. Photography with a Leica M-P is about as pure as it gets in the digital world - there's a great sense of satisfaction in creating meaningful images with this camera. Slow down and make it count!
This 27mm pancake lens is great for travel and other situations where a more subtle lens is called for.
A great portraiture lens for the Fuji X series of cameras. The Fujinon XF 56mm F1.2 R features a very fast aperture of f/1.2 and its fast autofocus doesn't get in your way.
The new standard lens for the Fujifilm X system. Its small size, rapid autofocus, fast aperture and weather resistant construction make the Fujinon XF 35mm F2 R WR a versatile companion for street, travel and general photography.
A premium wide angle lens for the Fuji X system with a very fast maximum aperture of f/1.4.
A very fast, wide angle lens for the Fuji X system. The XF 16mm F1.4R WR has a close focus of just 15cm, making it ideal for working with subjects at short distances from the lens. A very fast autofocus time (as low as 0.11 seconds) means you'll miss fewer shots.
Rediscover the joy of photography with the X-Pro2 from Fujifilm. Its hybrid optical / electronic viewfinder makes it well suited to a wide variety of situations - from being a professional tool through to a lightweight travel companion.
Leica Summicron-C lenses offer T2 performance in a very compact size. They cover many modern formats larger than super 35mm and have minimal breathing and superior build quality.
When using cforce mini motors with a camera that isn't an Arri Alexa Mini (with LBUS connector), you need the Arri AMC-1. A range of cables are available to make it work with cameras from Arri, Red, Canon and others.
T3.1. PL mount. Offering a vintage Cooke look, the 20-60mm Varopanchro zoom was designed to complement the Cooke Speed Panchro range of prime lenses.
Pair the Teradek Bolt Pro 600 receiver with any Bolt 600 Pro transmitter quickly via the built-in menu for an additional output. Solid wireless performance over ranges up to 180 metres line of sight.
Solid wireless video performance over a range of up to 180m. The Bolt Pro 600 is a major step up in reliability over earlier models from both Teradek and other manufacturers.
Solid wireless video performance over a range of up to 180m. The Bolt Pro 600 is a major step up in reliability over earlier models from both Teradek and other manufacturers. This is a 1:2 kit with one transmitter and two receivers.
Hazers are typically used to gently diffuse a room or enhance lighting effects, and produce a more subtle effect than fog or smoke machines. The Rosco V-Hazer uses a specially developed fluid that complies with industry safety guidelines.
A compact shotgun microphone with low self-noise and good attenuation of off-axis sound without colouration. Its RF circuit design makes it ideal for use in a wide range of environmental conditions.
The 664 is a professional 12 input, 16 track mixer and recorder with some of the best preamps in the industry. It has an integrated high quality Ambient timecode generator and can record 24-bit BWAV files to CF and SD media simultaneously.
The C300 mark II is a significant step up from the original C300. It features increased dynamic range (a claimed 15 stops), up to 4K internal recording, 4K RAW output and a new 10-bit Canon Log gamma.
Top quality Arri accessories make for a practical, well designed kit for using the C300 mark II for handheld work. The handgrip relocator provides convenient run/stop control and menu navigation without having to take the camera off your shoulder.
The 5DSR packs a 50.6 megapixel sensor into a familiar DSLR body. This means you get images with resolution rivalling some medium format systems, while still being able to use the huge range of EF mount lenses, an advanced autofocus system, and a familiar workflow.
Block 26 (665.6 - 691.1MHz). The Lectrosonics HM plug-on transmitter is often used in wireless boom applications and is compatible with a wide range of Lectrosonics receivers, and also some third party receivers.
Block 26 (665.6 - 691.1MHz). The R1a is a rugged and reliable IFB receiver for crew and talent communication on set. It is compatible with both Lectrosonics IFB transmitters and block 26 hybrid wireless transmitters.
Block 26 (665.6 - 691.1MHz). Lectrosonics gear is used by top sound professionals all over the world. The SMQV transmitter has dual battery compartments for extended operating times and selectable output power of 50mW or 100mW.
Block 26 (665.6 - 691.1MHz). The UCR411a is the top of the line wireless receiver from Lectrosonics. It has a built-in frequency spectrum analyser to help you select the optimum operating frequency in your location.
Considered by many to be the gold standard for recording dialogue for professional film, television and audio productions - particularly for interiors. This Schoeps kit consists of the high grade CMC 6U amplifier and an MK41 supercardioid capsule.
This Schoeps kit consists of the high grade CMC 6U amplifier and an MK8 figure-8 (bidrectional) capsule. This setup is often used in combination with a CMC 6U and MK41 capsule in M/S stereo recording applications.
A punchy, versatile 800W HMI fixture with a great light quality that is also domestic circuit friendly. Use it either as a traditional HMI or as a bug light inside a range of light modifiers (lanterns, softboxes, etc).
A small, high quality omnidirectional microphone wired with a TA5F connector for use with Lectrosonics wireless transmitters.
Designed to control the integrated FIZ motors in Fujinon, Angenieux and Canon servo units and provide lens data readout on the Arri WCU-4 hand unit. The EMC-1 is great for delegating one or more of focus, iris or zoom to a focus puller.
The Rode NTG3 is a supercardioid shotgun microphone designed for professional use in film, television, and ENG productions. The RF bias design means it is ideal when recording in environments where condensation might be an issue.
Designed to complement the Alexa Mini, the Arri cforce mini is a small, lightweight lens motor ideal for reducing clutter and weight for gimbal, steadicam, remote head and other applications.